International Bio-Analytical Industries, Inc.                            C
 

www.ibilabs.com

 

BACK TO MSDS MAIN

Physical Constants of Uranyl Sulfate

UO2SO4.3H2O

M A T E R I A L S A F E T Y D A T A S H E E T
This form may be used to comply with OSHA's Hazard Communication Standard, 29 CFR 1910.120
--------------------------------------------------------------------------------


 

Section 1 - Chemical Identifiers
 
  1. CAS Number
  1. UN/NA Number
  1. STCC Number
  1. CHRIS Code
  1. 1314-64-3
  1. none
  1. none
  1. URS
NFPA 704:
NO CODES
      DOT Hazard Label: data unavailable
General Description
An odorless yellow-green solid. Sinks in and mixes with water. A hydrate of formula (H2SO4)2.7H2O is also known. (NOAA, 2003)
Section 2 - Hazards
 

Reactivity Alerts

Air & Water Reactions
Soluble in water.
Fire Hazard
No information available.
Health Hazard
Inhalation of dust may irritate nose and throat. Contact with eyes causes irritation. (USCG, 1999)
Reactivity Profile
Inorganic oxidizing agents can react with reducing agents to generate heat and products that may be gaseous (causing pressurization of closed containers). The products may themselves be capable of further reactions (such as combustion in the air). The chemical reduction of materials in this group can be rapid or even explosive, but often requires initiation (heat, spark, catalyst, addition of a solvent). Inorganic oxidizing agents can react violently with active metals, cyanides, esters, and thiocyanates. Explosives often consist of an inorganic oxidizing agent mixed in intimate contact with a reducing agent. Gunpowder is such a mixture. Other examples are a mixture of sugar (an organic compound) plus sodium chlorate and magnesium (an inorganic reducing agent) plus barium peroxide. Compounds that inherently contain a group that is a reducing agent and an oxidizing agent are classed in both Group 44 (Inorganic Oxidizing Agents) and in Group 45 (Inorganic Reducing Agents; for example, ammonium nitrate). The strongly oxidizing elements oxygen and fluorine are classified here. Inorganic oxidizing agents that are also acids (such as nitric and perchloric acids) are not included in this group. They are in Group 2 (Acids, Inorganic Oxidizing). (REACTIVITY, 2003)
Belongs to reactive group(s)
Section 3 - Response Recommendations
 
Fire Fighting
No information available.
Non-Fire Response
No information available.
Protective Clothing
Approved dust respirator; goggles or face shield; protective clothing (USCG, 1999)
First Aid
Get medical attention after all exposures to this compound.

INGESTION: give large amounts of water; induce vomiting.

EYES: flush with water for at least 15 min.

SKIN: flush with water. (USCG, 1999)
Section 4 - Physical Properties
 
Flash Point: data unavailable

Lower Explosive Limit: data unavailable

Upper Explosive Limit: data unavailable

Auto Ignition Temperature: data unavailable

Melting Point: data unavailable

Vapor Pressure: data unavailable

Vapor Density: data unavailable

Specific Gravity: 3.28 at 68.0 ° F (USCG, 1999)

Boiling Point: data unavailable

Molecular Weight: 420.2 (USCG, 1999)

Water Solubility: data unavailable

AEGL: data unavailable

ERPG: use TEEL data

TEEL-1 TEEL-2 TEEL-3
0.6 mg/m3 1.0 mg/m3 10.0 mg/m3
(TEEL, 2005)

IDLH: 10.0 mg/m3 As U (soluble compounds, as U); A potential human carcinogen. (NIOSH, 2003)

Section 5 - Regulatory Information
 
Regulatory Names
No information available.

CAA RMP: Not a regulated chemical.

CERCLA: Not a regulated chemical.

EPCRA 302 EHS: Not a regulated chemical.

TRI (EPCRA 313): Not a regulated chemical.

RCRA chemical code: none

Section 6 - Alternate Chemical Names