1. IDENTIFICATION OF THE SUBSTANCE, PREPARATION AND COMPANY INFORMATION

Product Name: Uranium Peroxide

Formula: UH₂O₄

Description: Pale yellow crystalline solid.

Supplier

IBI Labs

3495 N. Dixie Hwy. Unit # 8

Boca Raton, FL 33431

Tel: 561-826-0061 Fax: 561-892-8450

Emergency Telephone Numbers

INFOTRAC

USA & Canada contact number: 1-800-535-5053

International contact number: 1-352-323-3500

2. REGISTRY NUMBERS AND INVENTORIES

• CAS RN: [12036-71-4]
• NIH PubChem CID: 29645
• EC (EINECS/ELINCS): 234-852-1
• UN (DOT): 2909
• Merck: 12,9993
• Beilstein/Gmelin: 60406 (G)

3. PROPERTIES

• Formula: UH₂O₄
• Formula Mass: 304.04000000000002
• Molecular Weight: 302.02651
• Melting Point, °C: 115°C
• Boiling Point, °C: 3813°C
• Density, g/cm³: 19.05 g/cm³ (20°C)

4. HAZARDS AND PROTECTION

This material decomposes to form U2O7 then to UO3 and oxygen.

Storage:

• Protect from physical damage.
• Store in a cool, dry place.
• Protect personnel from radiation emanation if present.
• Separate from other readily oxidable or combustible materials.

Handling:

• All chemicals should be considered hazardous.
• Avoid physical contact.
• Use appropriate and approved safety equipment.
• Untrained individuals should not handle this material or its container.
• Handling should occur in a chemical fume hood.

Protection: Wear protective gloves, clothing, and goggles.

Respirators: Wear a positive self-contained breathing apparatus (SCBA).

Small Spills and Leaks:

• Do not touch damaged packages or spilled material.
• If the material spilled is in liquid form, cover it with sand, earth, or other noncombustible absorbent material.
• If the material spilled is in powder form, cover it with a plastic sheet or tarp to minimize spreading.
• Contact the RSO.

Stability: Stable at recommended storage conditions.

Incompatibilities: Reacts rapidly with liquid bromine trifluoride.

5. FIREFIGHTING

The presence of a radioactive material will not influence the fire control processes and should not influence the selection of techniques.

• Small fires: Dry chemical, carbon dioxide, water spray, or regular foam.
• Large fires: Water spray, fog (flooding amounts).

Fire Potential: May burn but does not ignite readily.

6. HEALTH AND EXPOSURE EFFECTS

This material decomposes to form U2O7 then to UO3 and oxygen.

Exposure Limits

OSHA: PEL (8 h TWA): 0.05 mg

Exposure Effects

Ingestion and Inhalation: Stridor, dyspnea, upper airway injury, and pulmonary edema, especially following inhalation of vaporized caustics may occur.

Skin and Eyes:

• Severe skin and eye irritation may occur.
• Burns may occur.

7. FIRST AID

Inhalation:

• Apply artificial respiration if the patient is not breathing.
• If breathing is difficult, administer oxygen.
• See Ingestion.

Skin and Eyes:

• Immediately flush with water for at least 20 minutes.
• See ingestion.

Ingestion:

• Medical problems take priority over radiological concerns.
• Use first aid treatment according to the nature of the injury.
• Do not delay the care and transport of a seriously injured person.

8. TRANSPORTATION

UN Number: 2909

Response Guide: 161

Hazard Class: 7

USCG CHRIS Code: URP

Packing Group:

The classification of substances with multiple hazards must be determined following the criteria presented in the regulations mentioned above. Due to the various quantities and combinations of materials being shipped at one time, the information above must be determined based on the characteristics of the specific shipment.

9. OTHER INFORMATION

Copyright 2014 IBI Labs. License granted to make unlimited paper copies for internal use only.

IBI Labs requires that those who receive their materials comply with 29 CFR 1910.1200(h), which mandates that employers provide employees with effective information and training about hazardous chemicals in their workplace.

The contents of this document are believed to be accurate as of the date of revision and are provided in good faith. However, it is recommended that recipients use this information as supplementary and exercise caution and judgment regarding its accuracy and suitability. Please note that IBI Labs cannot accept responsibility for any indirect, incidental, or consequential damage resulting from the use of the information provided in this Safety Data Sheet.

IBI Labs makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. This information is provided without warranty, and any use of the product that does not conform to this Safety Data Sheet, or that is used in combination with any other product or process, is the responsibility of the user.

Revision Date: 04/22/2024